Gallery
Easy Formwork system
Easy Formwork system represents the most up
to date system to produce any kind of walls, with different length and
geometrical shapes, in a quickly and versatile way.
Using the Easy Formwork System is possible to plan step by step all
the work in advance, reducing the time of assembling and dismantling:
this means cut the high costs of labour.
Formworks are always fixed to each other in parallel, vertically or longitudinally, shaping on the floor the desiderated wall, then displaced with the crane. With the dedicated clamps, bars and different accessories it’s possible to lay the concrete in absolute safety respecting the different safety norms.
The structural characteristics of the profile and the plywood, give to the formwork high resistance to the compression allowing laying the concrete quite rapidly.
The different accessories and special elements allow realizing particular structure and shapes apparently complex and helping the construction company to perform task intuitively and economically.
The Ponteggi Edilponte S.p.A. technical personnel works with and for the client in order to find out the suitable solution for any building site, studying the project with the builder and supporting the workers during the execution.
1. Aligment clamp
It allows the vertical and horizontal formworks’ assembling, the
connection between the inner corners to different elements and it
simplifies the assembling, the displacement and dismantling.
There is a lot of possible pitches 0.81 m \ 1.14 m \ 1.50 m \ 1.80 m \
2.00 m \ 2.50 m \ 3.00 m and others not standard ones, which can be
realize upon request.
2. Adjustable clamp
Alternatively to the alignment clamp, it allows to put between the panels compensation bars (made of stainless steel or wood) till 25 cm length, extending the modularity of the framework system.
3. Fix inner corner
It’s connectable to the formwork through the alignment clamp and it allows the creation of corners for walls with any thickness.
4. Jointed inner corners
Through inner or exterior hinge and stiffening hinge elements it’s possible to make corners of different degrees.
5. Support frame
With the support frame and the support frame/formwork joint, it’s possible to assembly single wall in front a pre-existing wall, rocks or ground.
6. Lift shaft
The lift shaft is made using the biconical blocks, which allow removing the entire formwork structure as soon as the concrete’s laying is finished. The structure is suitable for lift shafts, crawl spaces or wells.
7. Footstall
It can be created with any type of formwork together with an exterior footstall clamp. For the internal footstall it’s normally used the conical corner in order to remove the entire structure as soon as the concrete’s laying is finished.